Here is my drawing for a box to enclose a RAMPS1.4 stepper motor control board. If you don’t have any RAMPS1.4 boards… I guess you won’t be interested. You can cut these at Quelab from 3mm acrylic. Cut one copy as is, another copy without the little access holes for the […]
Part 1 of a continuing series…
If you’re a member of our Facebook group, you’ve probably already heard this, but we won a really neat tool!
It started with Mr. What (Aaron) emailing out to the members mailing list about the Inventables.com contest – they were
Here in the Southwest, we are entering Year 5 of the drought, and there are more firework restrictions than ever. So once again I have compiled a few ideas/links from my own head and around the net. Share and enjoy!
No fire crackers? Buy an extra long roll of bubblewrap (or collect […]
After making it part way through the dreaded calibration procedure for a delta 3D printer, it does not seem that bad. I tried to write a quick overview that may be helpful to some.
I am not done yet, but I am within +-1mm of flat. I hope that the autocalibration […]
I have gotten busy, and not heard much from ACE. I don’t have tickets yet (guess I’ll get them at the door). I don’t know if I could bring the Dalek if I wanted to, without permission as an Exhibitor.
It has a blown transistor, which I have not fixed yet. I could just replace […]
There are some tricky aspects to working in wood. Since it is not totally flat, cut the stock just large enough for your piece, then stabilize with magnets. It can move with the engraving motion/vibration. Masking tape would have helped with burn marks/smears, but they can be removed to the desired degree with […]
I have drawings for a 3D printer filament spool holder, in 5mm stock. 5mm plywood is common for furniture backing and drawers. This was tested on the Quelab laser cutter. See my blog for details.
The axle can be made from a short piece of electrical conduit.
Greg here, to tell you about the next 2 Quelab events this week.
Tuesday, (25 March @ 8:30pm) – Come to hacknight on Tuesday to hear all about the plans for the Official Quelab Grand Opening event. The event is planned for May 2-3 and we’re looking for your help. We […]
Quelab, in association with ABQ Old School, would like to announce a class taking place this weekend and next in the Shipyard (Workshop), a how-to and hands-on class on building a Rocket Mass heater. This two part class on 22 and 29 March, from 9a-12p each day, will teach the design and construction of a […]
For those of you who didn’t make the general meeting on the second, Quelab has received a donation of a Laser Cutter! Based on our original expectations, it looked like a Full Spectrum laser, but on further research, it turns out it’s actually from g.Wilkie.
Tags3D-printer 3d printing 2600 adafruit air Arduino audio Bubonicon class classes crafting crowdfunding DIY event events gamenight general meeting hack hackerscouts hacknight Ignite Instructables inventables LED Linux Maker Faire makezine marblebrewery meeting Meetings music NMTC potluck privacy Projects public night pyp recap robots space steampunk TechMas theme video Workshop