Personally, I hate KiCad. The mill/router needs Gerber files, which can be generated using other tools. ... bandit

Post : Toorcamp: Milling PCBs With KiCad
URL : http://hackaday.com/2012/08/16/toorcamp-milling-pcbs-with-kicad/
Posted : August 16, 2012 at 8:01 am
Author : Eric Evenchick
Tags : cnc, KiCAD, pcb, toorcamp
Categories : cons

http://hackadaycom.files.wordpress.com/2012/08/7773267036_0a11bcb65a_k.jpg

[Hao (http://azureviolin.com/) ] from Noisebridge (https://www.noisebridge.net) showed me their CNC mill being used to etch PCBs. Using copper clad board, this MAXNC 10 mill routes the PCB with decent accuracy. This makes for very rapid prototyping of single sided PCBs.

[Hao] designed the PCB using the open source KiCad (http://www.kicad-pcb.org) EDA tool. This was used to draw the schematic, layout the PCB, and generate the Gerber files. Next, pcb2gcode (http://sourceforge.net/apps/mediawiki/pcb2gcode/index.php) was used to convert the Gerbers to G-code (http://en.wikipedia.org/wiki/G-code) , which is a standard set of instructions for controlling CNC devices. Finally, LinuxCNC (http://www.linuxcnc.org/) was used to send the G-code instructions to the mill. It's a powerful application of a completely open source workflow.

The PCB being milled is for a pressure based touch sensor. It uses the Freescale MPL115A (http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPL115A) barometric pressure sensor encased in a rubber housing. This sensor is being incorporated into the Dora Opensource Robot Assistant project (http://www.dorabot.com/) , which [Hao] and the Noisebridge folks are working on. We're looking forward to hearing more about the Dora project in the future.

Add a comment to this post: http://hackaday.com/2012/08/16/toorcamp-milling-pcbs-with-kicad/#respond

--
WordPress.com | Thanks for flying with WordPress!