Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
prusai3 [2017/02/23 20:31]
John Benedetto ↷ Page moved from hardware:3dprinter:prusai3 to prusai3
prusai3 [2019/08/15 19:14] (current)
John Benedetto ↷ Links adapted because of a move operation
Line 1: Line 1:
 ====== Prusa i3 printer ====== ====== Prusa i3 printer ======
 +
 +<WRAP center round info 60%>
 +**THIS CONTENT IS HISTORICAL**:​ This printer was decommissioned,​ and this information is historical in nature. It has been superseded by the [[:​blinky|Troybot,​ an i3v from MakerFarm]]. ​
 +</​WRAP>​
 +
  
 {{:​hardware:​3dprinter:​printer_prusai3.jpg?​100 ​ }}The Prusa i3 is a [[:​3dprinters|3D printer]] at Quelab. It was built when the [[:​prusa_mendel|Prusa Mendel]] caught fire; Ben K and Morgan G worked through a long night to get the carcass of the old printer disassembled and a new shell made. {{:​hardware:​3dprinter:​printer_prusai3.jpg?​100 ​ }}The Prusa i3 is a [[:​3dprinters|3D printer]] at Quelab. It was built when the [[:​prusa_mendel|Prusa Mendel]] caught fire; Ben K and Morgan G worked through a long night to get the carcass of the old printer disassembled and a new shell made.
Line 21: Line 26:
     * Stuff we had lying around     * Stuff we had lying around
  
-Parts were laser cut on OUR [[:​lasercutter|LASER CUTTER]] from SCRAP! And it looks pretty good all things considered.+Parts were laser cut on OUR [[lasercutters|LASER CUTTER]] from SCRAP! And it looks pretty good all things considered.
  
 ===== Preflight checklist ===== ===== Preflight checklist =====